Case Study: Superior Road Stabilization with T-PRO® in Northern British Columbia
Project Overview Lithic Industries successfully treated a remote section of road in Northern British Columbia with a topical application of T-PRO® Polymer Seal Coat. Designed specifically for dust control and wear-course stabilization, this project delivered lasting performance where traditional methods had consistently fallen short.
Project Objectives The primary goals were to:
- Reduce fines migration from the compacted base
- Minimize maintenance and resurfacing required to repair potholes
- Decrease re-graveling caused by material loss
- Significantly lower fugitive dust emissions
The Challenge Previous maintenance practices relied on calcium chloride and magnesium chloride for surface stabilization and dust suppression. In Northern British Columbia’s wet climate, these water-soluble chlorides created serious problems: slick, slippery surfaces during rain, washout of fines, rutting, and accelerated loss of road material. The result was higher maintenance costs, frequent re-graveling, and ongoing safety and environmental concerns.
The Lithic Solution Lithic Industries recommended T-PRO® as a high-performance, non-water-soluble polymer alternative to chlorides. Engineered for superior binding and durability, T-PRO® creates a stable, dust-free surface that resists moisture, traffic wear, and environmental stress delivering longer-lasting results with far less upkeep.
Proven Results The benefits were immediate and measurable. Shortly after application, the local road maintenance contractor observed:
- A pronounced increase in road density
- Significantly improved ride quality
- Markedly less surface degradation compared to adjacent chloride-treated sections
Even more impressive, the T-PRO® treated section required zero maintenance following a heavy rain event that occurred shortly after construction—proof of its superior performance in real-world northern conditions.
Application Details
- Equipment Used: Grader, Water Truck with Spray Bar, Smooth Drum Roller
- Application Method: Topical seal coat
- Coverage Rate: 130 ft² per gallon
Maintenance Requirements Ongoing care is simple and economical:
- Remove any loose material from the surface
- Apply a light topical re-coat of T-PRO® at 150–180 ft² per gallon
